Table of Contents
Advertisement
Chapter 9 Maintenance
9. Maintenance
Safety instructions
Version: 02.08.12
Hazard from direct or indirect contact with voltage-
conducting parts.
DANGER TO LIFE!
̶ Disconnect the labeling system from the mains voltage before
working on it.
*² Hazard from residual compressed air in the pneumatic com-
ponents.
Whipping compressed air hoses, thrown parts or uncontrolled
moving parts can cause injury.
̶ Disconnect the labeling system from the compressed air supply
before working on the labeling system.
Danger to health from the improper use of lubricants and
cleaners.
HEALTH HAZARD!
The instructions in the manufacturer's current safety data sheets
for the specific lubricants and cleaners that are used must be
observed along with the applicable safety and disposal regula-
tions
Repairs and servicing may only be performed by electrician
when the device is turned off (voltage-free) according to UVV
7.0 § 2 Para.3. Jobs that must be performed when the
electrical power and compressed air are still on may only be
done by trained experts who are aware of the associated
hazards and regulations (such as AuS).
The machine functions must be continuously monitored.
Unusual noise or movements (such as bucking, hammering, etc.)
are indicative of malfunctions and must be investigated
Page 56 of 71
32708732 Geset 121
Advertisement
Table of Contents
