Connection To Supply Voltage; Safety Instructions - Weber Geset 121 User Manual

Chapter 6 Installation and initial startup

Connection to supply voltage

Safety instructions

Requirements
 Power supply according to "Specifications" is installed close to or (max. 1,5 m
distant) from the labeling site.
 Main switch is in OFF/ 0-position
 Power cabling is available
Instruction
Please connect the labeling system with the power supply as follows.
.
Step
1
2
3
4
Version: 02.08.12
Hazards from actively controlled movements.
RISK OF INJURY FROM PULLING IN AND CRUSHING!
Immediately after turning on, several system parts make a
reference run or move to its home position!
̶ Maintain a distance from driven system components.
Procedure
Connect the power voltage cable with the power socket.
Risk of injury from pulling in and crushing!
Immediately after turning on, several system parts make a reference run
or move to its home position!
̶
Maintain a distance from driven system components.
Turn on the main switch.
Turn on the machine and control the running directions of the drives. If
the drives run against the intended driving direction, turn off the system
immediately. The electrical rotating field has to be turned in this case by
an electrician.
Stop the labeling station and turn off the main switch.
Page 35 of 71
32708732 Geset 121