Approved Persons - Weber Geset 121 User Manual

Chapter 2 Safety regulations

Approved persons

Only authorized personnel may work on the labeling system. Observe minimum age
permitted by law!
The labeling system may only be used by persons who have been instructed in its use.
Personnel to be trained, to receive orientation training, or currently being trained within the
scope of general training and education programs, must be strictly and continuously
supervised when operating the machine.
The operator of the labeling system must make the operating instructions available to the
user/operating personnel of the machine and ensure that these instructions have been
read and understood before commencing work on or with the machine. Only then may the
operator start and operate the labeling system.
The responsibilities for the different tasks and activities involving the labeling system must
be clearly defined and documented. Competencies and authorities must be clearly defined
and assigned to prevent any unambiguous situations that could endanger personnel.
Prepare a detailed workplace designation and assignment sheet if several persons are
working with or on the machine.
All work on the electrical equipment must only be carried out by a trained electrician.
Malfunctions may only be eliminated by authorized technicians.
All work associated with the assembly, installation and maintenance of the machine must
only be carried out by trained and responsible specialists or technicians.
The machine operator must ensure that the technicians have been trained how to use the
integrated control before they can troubleshoot problems or perform servicing.
Version: 02.08.12
Page 22 of 71
32708732 Geset 121