Chapter 9 Maintenance
Clean drive belts and transport belts
Safety instructions
If extraordinary plenty of deposits or foreign objects are available, the drive belts and the
transport belts should be cleaned and the foreign objects should be removed.
We recommend a frequent cleaning. If the label rests stick strongly, please use the Bluhm
Weber label remover article number 21800771.
Observe that electrical components do not get wet.
Spare parts
Safety instructions
Wiring diagram
The wiring diagram is included in switch cabinet.
Version: 02.08.12
Hazard from direct or indirect contact with voltage-
conducting parts.
DANGER TO LIFE!
̶ Disconnect the labeler from the mains voltage before working
on it. Pay attention that the electrical components do not get
wet.
Hazard from incorrect spare parts!
DANGER!
Incorrect or faulty spare parts can impair safety and cause injury or
damage to the machine.
̶ Only use original spare parts or parts that are specifically ap-
proved by the Bluhm Weber Group.
Page 67 of 71
32708732 Geset 121