Check Transport Belts - Weber Geset 121 User Manual

Chapter 9 Maintenance

Check transport belts

Requirements
 The labeling station is without power (no electrical power)
 The product is not being transported
Instruction
Please check the drive belt and the transport belts as follows.
Step
1
2
3
4
5
6
7
8
Version: 02.08.12
Procedure
Remove foreign particles and excessive contamination, particularly in the section
of the deflection- and drive rollers.
Check the drive belts and transport belts for any damage.
Inspect the drive rollers and deflection rollers for excessive wear.
Jerkily run is an indication for clamping units or for too low belt tension. Check if
the drive belts and the transport belts run without jerk.
Check if the deflection- and drive rollers align and inspect the wear of possibly
available flanged wheels.
Check that the transport belts do not run laterally.
Check the distance to other machine parts.
Check oil- and grease lubrication at the flange bearings and at the drive motor
block and renew according to maintenance instructions.
Page 63 of 71
32708732 Geset 121