Table of Contents
Advertisement
Chapter 2 Safety regulations
Protection Devices
Operate the system only if all safety- and protection devices are completely available and
functional. Check the protection devices for its function:
At first operation.
At regular routine test.
After exchange of security-relevant components and parts.
If deficiencies occur during operation at the protection devices, stop the system
immediately and remedy the deficiencies! Do not change or remove any protection
devices. Do not take the protection devices out of operation by any change.
Protection devices may only be removed when the system is stopped and safeguarded
against re-starting of the system (e.g. padlock at main switch). If subcomponents are
supplied, the protection devices have to be installed according to the regulations by the
operator.
Connection to the customer's conveying system may evoke dangerous areas at the
changeovers. Suitable safety measures have to be taken in this case.
*² System cover
The fixed and screwed system covers protect the user against mechanical hazards.
*² Main switch
The main switch can be locked in position "0" as a protection against a hazard by
accidentally or unauthorized switching on of the system.
Lock always the main switch:
During maintenance works.
If switching on the system may lead to a hazard.
*² Emergency-Stop Push Button
*²Only if system has the appropriate features.
Version: 02.08.12
The main switch serves for switching the system on and off. In
position "0" it interrupts the power supply to the system but however
the supply in front of the switch can be energized.
The emergency stop push button serves for an immediate stopping of
the complete labeling system. It should only be used in emergency
situations.
The emergency stop push button is locked after actuation and has to
be locked manually before restarting (consider the information at the
button).
Page 24 of 71
32708732 Geset 121
Advertisement
Table of Contents
