Adjust Side Guidance - Weber Geset 125 Original User Manual

Chapter 7 Adjustment and initial operation

Adjust side guidance

The side guidances position the products flush with the outside edge of the roll conveyor.
Information on adjustment of side guidance
The side guidance at the drive side are fix and can not be adjusted during production
operation. The guidance at the operator's side is adjusted by the star grips and the
adjustment. The guidances have to be adjusted that between product and side guiding is
a crack of appr. 1-1,5 mm per side.
No.
1
2
3
4
5
Requirements
¥
Labeling system is turned off.
¥
2 sample products.
¥
No transportation of products.
Instruction
Please adjust the side guidance as follows.
Step
1
2
3
Version: 30.07.14
Description
SIDE GUIDANCE DRIVE SIDE
SAMPLE PRODUCT
SIDE GUIDANCE OPERATOR'S SIDE
STARGRIP OF SIDE GUIDANCE OPERATOR'S SIDE
ADJUSTMENT OF SIDE GUIDANCE OPERATOR'S SIDE
Procedure
Loosen the star grips (Pos. 4, Fig. 7-5).
Open the side guidance (Pos. 3, Fig. 7-5) by the adjustment (Pos. 5, Fig.
7-5).
Place one sample product at beginning and end.
Page 37 of 57
40001136 Geset 125
Fig. 7-5: Side guidance
GB