System Controller; 12V Fan Header - Xilinx VCK190 Series User Manual

System Controller

[Figure 3, callout 48]
The VCK190 board includes an onboard System Controller. A host PC resident system controller
board user interface application is provided on the
user interface application enables the query and control of select programmable features such as
clocks, FMC functionality, and power system parameters. The VCK190 website also includes a
tutorial on the board user interface application and board setup instructions.
A brief summary of these instructions is provided here.
1. Ensure the Silicon Labs VCP USB-UART drivers are installed. See the Silicon Labs CP210x
USB-to-UART Installation Guide (UG1033).
2. Download the board user interface host PC application from the
website.
3. Connect a USB cable to VCK190 USB-UART USB-C connector (J207).
4. Power-cycle the VCK190.
5. Launch the board user interface application.
The board user interface application UI is shown in the following figure.
UG1366 (v1.0) January 7, 2021
VCK190 Board User Guide
Chapter 3: Board Component Descriptions
Figure 24: 12V Fan Header
VCK190 evaluation board website. This board
VCK190 evaluation board
www.xilinx.com
Send Feedback
X24956-121420
63