Xilinx VCK190 Series User Manual page 11

PS MIO[13:25]: USB2.0
○
PS MIO[26:36, 50:51]: SD1 I/F
○
PS MIO[37]: ZU4_TRIGGER
○
PS MIO[38:39]: PCIe_WAKE_B, PCIe_PERST_B
○
PS MIO[40:41]: CAN1
○
PS MIO[42:43]: UART0 to FTDI
○
PS MIO[44:47]: I2C1, I2C0
○
PS MIO[48:49], PS LPD MIO[0:25]: dual GEM0/1 RGMII Ethernet with stacked RJ-45
○
• Security: PSBATT button battery backup
• SYSMON header
• Operational switches (power on/off, PROG_B, boot mode DIP switch)
• Operational status LEDs (INIT, DONE, PS STATUS, PGOOD)
• Power management
• System Controller (XCZU4EG)
The VCK190 provides a rapid prototyping platform using the XCVC1902-2VSVA2197 device.
See the Versal Architecture and Product Data Sheet: Overview (DS950) for a feature set overview,
description, and ordering information.
UG1366 (v1.0) January 7, 2021
VCK190 Board User Guide
Chapter 1: Introduction
www.xilinx.com
Send Feedback
11