Opc-Ua Interface; Commands Opc-Ua To Rotea ™ Application - Thermo Scientific Gibco CTS Rotea User Manual

Chapter 4 OPC-UA interface
4

OPC-UA interface

OPC-UA interface
Commands OPC-UA to Rotea
Table 2 OPC-UA command list
RescanKit
SetGuiUserLevel
SetLocalProtocolFilePath
SetPlayPauseButtonEnable
SetProtocolFileContents
SetProtocolFileByLookupTableId
SetParameter1 through SetParameter20
96
™
application
Variable Type
Boolean Force a kit rescan:
• True – The instrument will rescan the kit
barcode.
• False – No action.
• GUIManagedLogin – Application login
Enum
is managed by the GUI, OPC-UA
commands are ignored in this mode.
• ViewUser – The MES has control of the
Rotea ™
the instrument status.
• AdminUser – The GUI is logged in as
an administrator and has control the
™
Rotea
are ignored in this mode.
Note: When OPC-UA enabled, a
SetGuiUserLevel command from the OPC-UA
server will over-ride the current instrument log-
in state.
String Set the file name path of the protocol on the
laptop to be loaded to the Rotea
Enum Enable the Play/Pause button on the Rotea
instrument.
• Disabled
• AsPerProtocol
• Enabled
String Send the protocol file contents to the laptop to
be loaded to the Rotea
UInt32 Id of the protocol file in the OPC-UA look
up table. The lookup table is defined in
OPCUAProtocolList.yaml
Int32 The Metadata parameter data for the protocol.
The associated name of the parameter can be
found in variables ParameterName1 through
ParameterName20 after the protocol has been
loaded.
CTS ™ Rotea ™ Counterflow Centrifugation System User Guide
Values/Description
instrument and GUI just displays
instrument, OPC-UA commands
™
instrument.
™
instrument.
™