Thermo Scientific Gibco CTS Rotea User Manual page 23

7. Check if Windows Update installed the required USB device drivers. Right click on This PC on the
desktop and open Manage.
8. Ensure the USB devices are detected correctly. Check that the devices highlighted in figure can be
seen:
• USB Vision Digital Camera
• USB Serial Port (COM X)
• SNAPI Imaging Interface
Note: If these devices are missing ensure the USB cable is plugged in, the Rotea
powered and on, that there are no more Windows
9. The installation is now complete. Move onto setting up the application for the first time.
CTS ™ Rotea ™ Counterflow Centrifugation System User Guide
Chapter 2 Installation and setup
™
software updates to complete.
2
Installation
™
instrument is
23