Thermo Scientific Gibco CTS Rotea User Manual page 103

Table 3 Variable set when changed (continued)
Variable
UserLevel
ProtocolStepNumber
ProtocolStepName
ProtocolTotalSteps
PumpDirection
PumpRate
RunLogFileName
CTS ™ Rotea ™ Counterflow Centrifugation System User Guide
Type
Enum • NoUser – No user is logged in. OPC-UA
has no control
• ServiceUser – The service user is logged
in. OPC-UA has no control
• AdminUser – A GUI Administration user is
logged in. OPC-UA has no control
• FullUser – A GUI Full user is logged in.
OPC-UA has no control
• BasicUser – A GUI Basic user is logged
in. OPC-UA has no control
• BasicUser – A GUI Basic user is logged in.
OPC-UA has no control
• BasicUser – A GUI Basic user is logged in.
OPC-UA has no control
• ViewUser – A GUI View user is logged in.
OPC-UA has no control
• OPCViewUser – An OPC-UA View user is
logged in. The GUI is in view only mode,
the OPC-UA interface has full control
• OPCViewUser – An OPC-UA View user is
logged in. The GUI is in view only mode,
the OPC-UA interface has full control.
• OPCAdminUser – An OPC-UA
Administration user is logged in. The GUI
has full control of the instrument, OPC-UA
has no control.
The protocol step number
UInt32
The protocol step name
String
UInt32 Total number of steps in the protocol
Enum The current pump direction.
• NotApplicable
• Forward
• Reverse
The current pump speed
UInt32
String The current
Chapter 4 OPC-UA interface
OPC-UA interface
Value/Description
4
103