Note: Suitable means of protective earthing are provided for this device
1
Figure 5 Back view of instrument
Mains IEC connector
1
USB-C port
2
1. Connect mains IEC connector.
2. Plug mains into power GPO
3. Connect the laptop to USB-C port on the instrument using the USB-C cable.
4. Insert 2 off bag hanger posts, adjust height to suit Kit and turn nut clockwise to secure in place.
5. Adjust the instrument position on the bench where it is required.
CTS
™
Rotea
™
Counterflow Centrifugation System User Guide
Chapter 2 Installation and setup
Instrument installation
2
2
17