Installing The Platform - Zepro ZHZ 500-850 Installation Instruction

Installation
7.3

Installing the Platform

1. Remove the cover at the lower en of the platform, see Fig 33.
2. Push the shaft out off the platform, see Fig 34.
3. Position the platform on the lift arms, see Fig 35.
4. Push the shaft inwards until its flush with the platforms suface on the opposite side,
see Fig 36:1.
5. Fit in the screw (attached), see Fig 36:2, to lock the platform shaft.
6. Refit the cover.
7. Attach the cylinder to the cylinder bracket and lock with locking pin, see Fig 37.
Fig 34. Push the shaft out off the platform
1
Fig 36. Fit in and lock the platform shaft
www.zepro.com
Fig 33. Remove the cover
2
Fig 35. Place the platform
Fig 37. Attach and lock the cylinder
51