Zepro ZHZ 500-850 Installation Instruction page 59

Installation
7.9.3 Installation of main fuse on vehicles without connection point
On vehicles without connection point, the following fuse box with fuse, 150A (24V) or 250A (12V) must be
installed. The fuse box must be positioned well-protected as close to the battery as possible.
1. Screw the fuse box into position with the following bolts (2 x M4x25) + washers and nuts, see Fig 50.
2. Connect the main power cable to the connection point and place the fuse on top, see Fig 51:1 and
Fig 51:2.
3. Connect a cable from the battery's positive terminal, see Fig 51:3.
4. Screw the cable connections and fuse into place with the knob. Install the cables at 90° or 180° from each
other. Install the fuse at right angles to the cables, see Fig 51.
WARNING!
The knob must lie against and centre the cable clip so that it does not come into contact with the bolt.
Incorrect installation can cause the fuse to malfunction. Risk of fire in the event of a short circuit, see Fig
52 and Fig 53.
Fig 50. Screw the fuse
holder into place
Fig 52. Correct installation
www.zepro.com
Install the fuse box cover, see Fig 543.
Fig 53. Incorrect installation
4
3
2
1
Fig 51. Place fuse and
connect wiring
Fig 54. Cover fuse box
59