Installation Workflow; Installing The Support Frame; Electrical Connections; Installing The Platform - Zepro ZHD 2500-130 Installation Instructions Manual

Installation workflow
3

Installation workflow

3.1

Installing the support frame

• Calculating the installed dimensions
• Attaching the mounting jig to the rear beam
• Aligning the support frame
• Mounting chassis brackets
• Detaching the mounting jig
3.2

Electrical connections

• Installing the control devices
• Installing the control device cables
• Installing the main power cable
3.3

Installing the platform

• Installing the platform
• Installing seals and end stops
• Installing the armstops
3.4

Installing cylinders

• Adjusting tilt cylinder
• Test running
3.5

Attaching decals

www.zepro.com
ZHD 2500-130/150
11