Transport Plug; Moving Parts - Free Movement - Zepro ZHZ 500-850 Installation Instruction

Safety rules
2.2

Transport plug

NOTE.
When installing a lift, the transport
plug in the hydraulic unit must be re-
moved and replaced with the normal
tank cap supplied with the hydraulic
unit.
2.3 Moving parts – free move-
ment
m
WARNING!
During final inspection*, the space
occupied by the moving cylinders
must be cleared and made safe.
There is a risk of collision between
cylinder and the following items:
subframe, truck chassis, member
for rear lights (number plate) and
the lift's chassis bracket (with short
overhangs).
*Final inspection must be performed
with the platform by the vehicle floor
and tilted down 10°. The clearance to
the nearest part of the cylinder must
be at least .40 mm
m
WARNING!
The lift platform must not be tilted
down more than max. 10° from
horizontal when people are on the
platform.
www.zepro.com
54853
Fig 4. Replace the transport plug
with the normal tank cap
Fig 5. The clearance to the nearest part of
the cylinder must be at least 40 mm.
Fig 6. The lift platform must not be tilted down
more than max. 10° from horizontal.
10°
10°
9