Table of Contents
Advertisement
Main parts
2.4
Attaching third-party equipment is prohibited
m
WARNING!
Third-party equipment (both electrical and hydraulic) must not be attached to Zepro's tail lifts.
Attaching third-party equipment may interfere with the lift's systems and its safety functions.
Risk of injury and damage. If it is necessary to install other equipment, check the vehicle
manufacturer's body instructions and use the vehicle's attachment features.
2.5
Installation
m
WARNING!
The lift's platform must not be installed so that it cannot reach ground level.
Zepro's tail lifts are only approved for installation with Zepro's installation kits.
The lift's capacity must NOT exceed the capacity approved by the vehicle manufacturer.
Take great care during test operation before adjusting the tilt cylinder to ensure that the vehicle
body is not damaged. Make sure that the tilt cylinder is adjusted in such a way that the platform
does not catch on the vehicle body when the platform is tilted up fully.
3
Main parts
Link
10
Lift arm
Lift cylinder
Support arm
Fig 7. Overview
Platform
Tilt cylinder
Frame
Step
www.zepro.com
Hide quick links:
Advertisement
Table of Contents
