Figure 9-11 Positioning The Diskette Drive - Sun Microsystems Ultra 1 140 Service Manual

9
9.3.2 Replacing a Diskette Drive
9-12
1. Place the diskette drive inside the bracket.
See Figure 9-11.
2. Replace the four screws.
Diskette drive

Figure 9-11 Positioning the Diskette Drive

3. Replace the bracket into the chassis.
See Section 9.2.3, "Replacing a CD-ROM/Tape Drive," on page 8 if
applicable, and Section 9.2.4, "Replacing the Bracket into the Chassis," on
page 9.
Sun Ultra 1 Series Service Manual—November 1995
Screws
4 places
Bracket