Table of Contents
Advertisement
3
3.6.2 Diag-level NVRAM Variable is Set to Min
3-12
Probing Memory Done
MEM BASE = 0000.0000.2000.0000
MEM SIZE = 0000.0000.0400.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.1a3c
PC = 0000.0000.0000.1a80
Decompressing into Memory Done
Size = 0000.0000.0006.84a0
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0
SPOR:1 POR:0
Probing Memory Bank #0
Probing Memory Bank #1
Probing Memory Bank #2
Probing Memory Bank #3
Probing /sbus@1f,0 at 0,0
Probing /sbus@1f,0 at 1,0
Probing /sbus@1f,0 at 2,0
If you set the diag-level NVRAM parameter to min, POST runs an
abbreviated set of tests. This mode takes approximately 30 seconds to
complete. Following is an example of serial port A output when POST
runs in this mode.
Sun Ultra 1 Series Service Manual—November 1995
16 +
16 :
32 Megabytes
0 +
0 :
0 Megabytes
32 +
32 :
64 Megabytes
0 +
0 :
0 Megabytes
Nothing there
Nothing there
cgsix
Advertisement
Table of Contents
