6
Installing the Diskette Drive or Accessory Device
1. Power off the system and open the system unit (
2. Locate the wrist strap, and attach its adhesive copper strip to
the chassis back panel. Wrap the other end twice around your
wrist, with the adhesive side against your skin.
3. Remove the peripheral bezel from the front of the system unit.
JP tasks
KR tasks
TW tasks
PRC tasks
28
2).
4. Use a Phillips screwdriver to loosen the two screws holding the
removable media assembly (RMA) to the system chassis.
5. Slide the RMA out of the system chassis.