Note – Each DSIMM removed from the system should be replaced with
another DSIMM. The replacement DSIMM should have the same capacity as
the defective one. It should also be inserted into the same socket as the
defective one.
The Sun Ultra 1 Series system must have a pair of DSIMMs in bank 0 to be able
to boot. Up to eight DSIMMs can be installed in the system. They can be
located in the sockets described on Table 10-2. However, each bank must
contain two DSIMMs of equal density (for example: two 16MB DSIMMs, two
64MB DSIMMs) to function properly. Do not mix DSIMM densities in any
bank.
Table 10-2 Bank and Socket Locations for DSIMMs
Bank
Socket
0 (Required)
U0701 + U0601
1
U0702 + U0602
2
U0703 + U0603
3
U0704 + U0604
System Board and Component Replacement
10
10-19