Table of Contents
Advertisement
5
5.3 Safety Precautions
5.3.1 Modification to Equipment
!
5.3.2 Placement of a Sun Product
!
5.3.3 Power Cord Connection
5-2
Warning – Hazardous voltages are present. To reduce the risk of electric shock
and danger to personal health, follow the instructions.
Caution – Hot surfaces. Avoid contact. Surfaces are hot and may cause
personal injury if touched.
Caution – Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems, Inc. is not responsible for regulatory
compliance of a modified Sun product.
Caution – To ensure reliable operation of your Sun product and to protect it
from overheating, openings in the equipment must not be blocked or covered.
A Sun product should never be placed near a radiator or hot air register.
Warning – Not all power cords have the same current ratings. Household
extension cords do not have overload protection. Do not use household
extension cords with your Sun product.
Warning – The power switch of this product functions as a standby type
device only. The power cord serves as the primary disconnect device for the
system. Be sure to plug the power cord into a grounded power outlet that is
nearby the system and is readily accessible. Do not connect the power cord
when the power supply has been removed from the system chassis.
Electron Service Manual—November 1995
Advertisement
Table of Contents
