Cooling fans
Three cooling fans are located on one side of the Business Policy Switch to
provide cooling for the internal components. (See
you install the switch, be sure to allow enough space on both sides of the switch
for adequate air flow. See Installing the Business Policy Switch 2000 for detailed
information.
AC power receptacle
The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications.
international power cords.
Table 4 International power cord specifications
Country/Plug description
Continental Europe:
•
CEE7 standard VII male plug
•
Harmonized cord (HAR marking
on the outside of the cord jacket
to comply with the CENELEC
Harmonized Document HD-21)
U.S./Canada/Japan:
•
NEMA5-15P male plug
•
UL recognized (UL stamped
on cord jacket)
•
CSA certified (CSA label
secured to the cord)
Figure 1 on page
Specifications
220 or 230 VAC
50 Hz
Single phase
100 or 120 VAC
50–60 Hz
Single phase
Using the Business Policy Switch 2000 Version 2.0
40.) When
Table 4
lists specifications for
Typical plug
48
228FA
227FA