Delta Electronics ASDA-A Series User Manual page 99

Call 1(800)985-6929 for Sales
Chapter 5 Trial Run and Tuning Procedure|ASDA-A&A+ Series
The position command is selected by POS0 ~ POS2. Please refer to the following table:
Position
POS2
Command
Internal
Position 1
Internal
Position 2
Internal
Position 3
Internal
Position 4
Internal
Position 5
Internal
Position 6
Internal
Position 7
Internal
Position 8
0: indicates OFF (Normally Open); 1: indicates ON (Normally Closed)
The users can set the value of these 8 groups of commands (P1-15 ~ P1-30) freely. The command can be
absolute position command (P1-33 =0) or relative position command (P1-33 =1).
For example:
Set P1-33 to 1 (Absolute position command)
(The new setting will be effective after the servo drive is restarted (after switching power
off and on))
Set P1-15 to 1 (rotation number)
Set P1-16 to 0 (pulse number)
The command of internal position 1: P1-15 Rotation No. + P1-16 Pulse No.
Set P1-17 to 10 (rotation number)
Set P1-18 to 0 (pulse number)
The command of internal position 2: P1-17 Rotation No. + P1-18 Pulse No.
Set P1-19 to -10 (rotation number)
Set P1-20 to 0 (pulse number)
The command of internal position 3: P1-19 Rotation No. + P1-20 Pulse No.
Set P1-21 to 100 (rotation number)
Set P1-22 to 0 (pulse number)
The command of internal position 4: P1-21 Rotation No. + P1-22 Pulse No.
Set P1-23 to -1000 (rotation number)
Set P1-24 to 0 (pulse number)
The command of internal position 5: P1-23 Rotation No. + P1-24 Pulse No.
5-12
Call 1(800)985-6929 for Sales
POS1 POS0
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
deltaacdrives.com
Moving Speed
CTRG Parameters
P1-15
P2-36 (V1)
P1-16
P1-17
P2-37 (V2)
P1-18
P1-19
P2-38 (V3)
P1-20
P1-21
P2-39 (V4)
P1-22
P1-23
P2-40 (V5)
P1-24
P1-25
P2-41 (V6)
P1-26
P1-27
P2-42 (V7)
P1-28
P1-29
P2-43 (V8)
P1-30
deltaacdrives.com
sales@deltaacdrives.com
Description
Register
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Rotation No. (+/- 30000)
Pulse No. (+/- max cnt)
Revision April 2009
sales@deltaacdrives.com