Load And Store - HP 1660CP Series User Manual

Disk Drive Operations

Load and Store

Load and Store
When you choose Load or Store, you next need to set the field immediately
to the right. This field presents at least three choices: All, System, and
Analyzer. If you have other software loaded, it might add to the list of
choices.
All
Choose All to store or load both system and analyzer information. If you are
storing, two files (one for the system and one for the analyzer) are created.
The system file ends in "._ _" and the analyzer file ends in "._A".
System
System files store system configurations. System information for the
HP 1660CP-series consists of settings for printer, controller, RS-232-C,
HP-IB, shade, and sound. LAN settings are not saved. System configuration
files end in two underscores and have a file type of 16[6/7]x_cnfg.
Analyzer
Analyzer configuration files store measurement setups, including data. If you
are storing the current measurement and an inverse assembler is already
loaded, when you reload the file you are now creating it will try to pull in the
inverse assembler. Other attributes stored in analyzer configuration files
include labels, trigger sequence, arming configuration, measurement data,
markers, analyzer names, and pod assignments. Analyzer configuration files
end in "._A" and have a file type of 166xan_config.
Pattern Generator
Pattern generator files store the configuration attributes and parameters of
the pattern generator, including vectors and macros, labels, pod assignments,
and clock frequency. Pattern generator configuration files end in "._B" and
have a file type of 16522_config.
8-24