Table of Contents
Advertisement
The Mixed Display Menu
The Mixed Display menu combines a state listing display located at the top of
the menu and a waveform display located at the bottom of the menu. The
Mixed Display menu shows both state and timing data in the same display.
The Mixed Display menu only becomes available when at least one analyzer is
configured as a state analyzer, with its Count field in the Trigger menu set to
Time. If two state analyzers are configured, both state listing displays can be
interleaved as well as shown separately, however, the listing menus are the
best display menus for a two-state analyzer configuration.
The waveform display area shows timing analyzer waveforms from the
configured timing analyzer.
Interleaving state listings
Interleaved state listings lets you view two labels and their data from
different analyzers in the same column. The process of interleaving state
listings can be performed in either the Listing menu or the Mixed Display
menu. For example, if data is interleaved in the Listing menu, it will be
automatically interleaved in the Mixed Display menu.
The interleaved label is placed directly above the selected label, and all
interleaved data is displayed in white. In addition, the state numbers of the
interleaved data are indented to the right. Because of the lack of room
available in the listing portion of the Mixed Display menu, the label
identifying the interleaved data is not displayed. For this reason, when two
state analyzers are configured the listing menus should be used to display
interleaved labels.
8-63
Advertisement
Table of Contents
Troubleshooting
