Using the Pattern Generator
To add, delete, or rename parameters
To add, delete, or rename parameters
Parameters are set when they are inserted into MAIN or INIT sequences.
The changes you make in the parameter list will appear every place in the
INIT or MAIN sequences in which you have used that macro.
From the User Macros menu, select a macro from the list of macros.
1
Highlight the first line of the macro, then select the field.
2
To add a parameter, select Add Parameter, then select the new
3
parameter field that appears and rename the parameter.
To delete a parameter from the parameter list, select a parameter
4
name, then select Delete Parameter.
5–14