•
Hard Disk allows you to perform file operations on the hard disk.
•
Flexible Disk allows you to perform file operations on the flexible disk.
•
External I/O allows you to configure your HP-IB, RS-232-C, and LAN
interfaces and connect to a printer and controller.
•
Utilities allows you to set the clock, update the operating system software,
and adjust the display.
•
Test displays the installed software version number and loads the self
tests.
See Also
For information on "File Management" see Chapter 7,and for information on
"Disk Drive Operations" see Chapter 8.
For information on the External I/O menu, "Connecting Peripherals", see
Chapter 2, and "The RS-232-C, HP-IB, and Centronics Interfaces" see
Chapter 8.
For how to run the self-tests, "Operator's Service" see Chapter 13.
Using the Logic Analyzer
To access the System menus
3–5