Glossary
analyzer, timing analyzer, and oscillo-
scope cannot complete their
measurement unless they find a trig-
ger.
user symbol table A table con-
taining the symbols that are created
by the user, using the Symbols op-
tion in the Format menu. This is the
standard symbol capability of the HP
logic analyzer. See also OMF Symbol
Table.
waveform An oscilloscope-like dis-
play of a trace. Because analyzers
only record whether a line is "low" or
"high" at the time of sampling, the
waveforms are sharp square waves
rather than the rough curves of an
oscilloscope. See also listing and
trace.
Glossary–3