To Save A Trace List In Ascii Format - HP 1660CP Series User Manual

To save a trace list in ASCII format

Some screens, such as file lists and trace lists, contain columns of ASCII data
that you may want to move to a computer for further manipulation or
analysis. You can save these displays as ASCII files. While a screen capture
saves only the data shown onscreen, saving the display as an ASCII file
captures all data in the list, even if it is offscreen.
Insert a DOS-formatted 3.5-inch disk in the flexible disk drive.
1
Set up the menu you want to capture, or run a measurement from
2
which you want to save data.
Remember that only displays that present lists of textual data can be
captured as ASCII files.
Select Print and choose Print Disk from the pop-up menu.
3
Select the Filename field and specify a file name to which the data
4
will be saved.
Select ASCII (ALL) from the Output Format field.
5
If the current display contents can not be saved as an ASCII file, this option
will not be present in the Output Format field.
Select Flexible Disk from the Output Disk menu, then select Execute.
6
68332EVS - State Listing
Label ADDR
__________ _____ ______________________________________ _________________
0 406F4
1 0FF7A
2 0FF7C
3 40992
4 40994 nu MOVE.B
5 0FF76
6 0FF78
7 4093E
8 40940
9 40942
10 40944
Part of a Trace Listing Saved as an ASCII File
CPU32 Mnemonic
ANDI.L #********,(A6)+
0004 data write
06F6 data write
BSR.B 0004093E
********,(****,A7)
0004 data write
0994 data write
MOVE.W #03FF,00FFFA46
03FF pgm read
00FF pgm read
FA46 pgm read
File Management
To save a trace list in ASCII format
STAT
Opcode Fetch
Data Write
Data Write
Opcode Fetch
Opcode Fetch
Data Write
Data Write
Opcode Fetch
Opcode Fetch
Opcode Fetch
Opcode Fetch
7-7