HP 1660CP Series User Manual page 190

Disk Drive Operations
Disk operations
•
Load
Loads a file into the logic analyzer, overwriting the current settings or
information. You can load system configurations, analyzer measurement
setups including measurement data, and inverse assembler files.
•
Make Directory
Creates a new directory on a DOS disk. You can save or copy files to the new
directory using the store and copy commands. This is not available with LIF
disks.
•
Pack Disk
Removes all empty or unused sectors between files on a LIF disk so that
more space is available. If you select Pack Disk while a DOS disk is in the
drive, nothing happens.
•
Purge
Purges (deletes) the file you indicate. Deleted files cannot be recovered.
•
Rename
Changes the name of the file you select.
•
Store
Saves system and analyzer measurement setups including data.
Disk operation safeguards
If there is a problem or additional information is needed to execute an
operation, a pop-up appears near the center of the screen displaying the
status of the operation.
If executing a disk operation could destroy or damage a file, a pop-up appears
when you select Execute. If you do not want to complete the operation,
select Cancel to cancel the operation. Otherwise, select Continue.
8-22