Probing
Assembling the probing system
Connecting Probe Cables to the Logic Analyzer
All probe cables are installed at Hewlett-Packard. If you need to replace a
probe cable, refer to the HP 1660C/CS/CP-Series Logic Analyzers Service
Guide. You can purchase the Service Guide from your HP Sales Office.
Connecting the Probe Tip Assembly to the Probe Cable
To connect a probe tip assembly to a cable, align the key on the cable
connector with the slot on the probe housing and press them together.
Probe tip assembly
Probe cable
Key
Connecting Probe Tip Assembly
8-12