HP 1660CP Series User Manual page 262

System Performance Analysis (SPA) Software
Using State Overview, State Histogram, and Time Interval
Using State Histogram mode
Choosing a label to monitor To specify a label to monitor, select the
Label field in the State Histogram display (item 1 in the figure below). In
the pop-up, you will see a list of all the labels defined in the Format
specification. From this list, choose the label you want to monitor.
Changing from one label to another will erase the display setup for the first
label. If you want to change to a different label, but do not want to lose the
setup for the current one, save the current one to a disk.
Defining the ranges To define a range on the specified label, select
one of the 11 range fields (item 2 in the figure below). When you select
one of the 11 ranges, you will see the Range Definition pop-up (item 3 in
the figure below). This pop-up has fields where you enter the low and
high value, a name for the range, and whether the range is on or off.
2
3
SPA State Histogram Menu with Fields Called Out
9-24
1