Attach The Camera; Remove The Camera - Thermo Scientific Invitrogen E-Gel G8100 User Manual

Attach the camera

The E-Gel
the E-Gel
during a run, or after the run is completed.
1. Unfasten the docking connector cover.
2. Align the docking connector with the camera
connector.
3. Lower the E-Gel
the electrophoresis device and gently snap the
camera in place.
4. Once connected, the E-Gel
displays a brief welcome splash screen, which
changes to the home screen when it is ready to
use.

Remove the camera

1. Carefully hold the sides of the camera
hood and insert your fingers toward the
rear of the handhold.
2. Lift the camera straight upwards.
IMPORTANT! Do not tilt the camera
backwards during removal to avoid
damaging the docking connectors.
22
™ Power Snap Camera can be attached to
™
Power Snap Electrophoresis Device either
™ Power Snap Camera on top of
™ Power Snap Camera
E-Gel Power Snap Electrophoresis System User Guide
™