General guidelines
•
The E-Gel
System, and only works when docked to The E-Gel
•
The E-Gel
suitable for use with any third party products or pour-your-own agarose gels.
•
The E-Gel
transferred from the camera using an USB storage device.
Set up the camera
The first time the camera is started requires the date and time to be set.
1.
Select Settings /
2.
Select Instrument settings.
3.
Select Date/Time.
4.
Choose the date and time format, then select Done.
5.
Set the current date and time, then select Done.
Modify
Access E-Gel
camera
•
Select Instrument setting to adjust screen brightness, default image size/type, and sleep
settings
mode features.
•
Select Update software to install the latest firmware update.
Home
The home screen displays the status dial, which shows a countdown timer when the gel is
running. Three additional buttons are displayed across the bottom of the screen.
screen
E-G el
Power Snap Electroph oresis System User Guide
™
Using the E-Gel
™
Power Snap Camera is an integral part of The E-Gel
™
Power Snap Camera, is designed for imaging pre-cast E-Gel
™
Power Snap Camera does not require connection to a desktop computer. Data is
.
™
Power Snap Camera settings from the home screen by pressing Settings /
Control
Power Snap Camera
™
™
Power Snap Electrophoresis
™
Power Snap Electrophoresis Device.
Function
View gel image and access:
Capture gel image
•
•
Edit/adjust capture settings
Export image
•
Access image gallery
Capture gel image
Pause/resume gel run
™
agarose gels. It is not
.
21