Cancel The Run; Edit Gel Duration; Change To Another Protocol - Thermo Scientific Invitrogen E-Gel G8100 User Manual

Cancel the 1. Press Pause run to temporarily stop the run.
run
2. Press the status dial.
3. Press Cancel run to stop the run.
Edit gel 1. Press Pause run to temporarily stop the run.
duration
2. Press the status dial.
3. Press Edit gel duration.
4. Adjust the protocol duration using the +/– buttons or
press in the duration field to open a keyboard to enter a
number.
5. Select Resume to restart the run.
Note: Do not run the same gel multiple times or extend the
gel protocol beyond the maximum allowed duration.
Running the gel past the allowed duration will damage the
gel and result in poor sample separation.
Change to
1. Press Pause run to temporarily stop the run.
another
2. Press the status dial.
protocol
3. Press Cancel run to stop the run.
4. Press Set up run.
5. Select another E-Gel
Use the up/down arrows to navigate through the
menu.
6. Press Start run
20
™ protocol (e.g., Reverse E-Gel).
E-Gel Power Snap Electrophoresis System User Guide
™