Agilent Technologies 1660C Series User Manual page 12

Connecting and Configuring
To configure the network addresses
If necessary, add the logic analyzer to your local network
3
configuration.
If you are doing a point-to-point connection, this step is unnecessary because
the computer and the logic analyzer only communicate with each other.
For UNIX networks and PC networks based on a UNIX model, the network
software requires an entry for the logic analyzer before another computer can
talk to it. These entries are usually kept in a file named /etc/hosts. The
/etc/hosts file also associates an alias with the IP address so that you can
use a meaningful name rather than the IP address.
Other styles of PC networks have different conventions. Consult your LAN
documentation or your local system administrator to see if you need to do
anything else.
1–6