Agilent Technologies 1660C Series User Manual page 68

Concepts
Directory structure of the logic analyzer's file system
\status Status information.
The directory structure of the logic analyzer is fixed. You cannot create or
delete directories or files except under the local hard and flexible disk
directories.
Analyzer (\slot_a) Subdirectories and Files
The slot_a directory contains a subdirectory called data.asc that
contains ASCII measurement data.
There are two subdirectories attached to the data.asc directory, one for
each of the two analyzers in the logic analyzer (if they are turned on in the
Configuration Menu). The default names of these subdirectories are
machine1 and machine2, but they will change whenever the analyzer
names are changed in the Configuration Menu.
slot_a
data.asc
{analyzer 1}
{label 1}.txt
{label 2}.txt
{label 3}.txt
.
.
.
1st_line.txt
line_num.txt
time_abs.txt
Analyzer Directory Structure
Label Data Files: \slot_a\data.asc\{analyzer name}\{label}.txt Both
analyzer subdirectories contain files corresponding to the labels you have
set up in that analyzer's Format Menu. These files contain the current
measurement data for the channels assigned to each label.
6-4
{Root}
system
program
setup.raw
disk
graphics
{analyzer 2}
{label 1}.txt
{label 2}.txt
{label 3}.txt
.
.
.
1st_line.txt
line_num.txt
state_abs.txt
status
frame.txt
mount.txt
system.txt