Agilent Technologies 1660C Series User Manual page 40

Retrieving and Restoring Data
To copy ASCII measurement data
Example
Copying ASCII data over an NFS mount
Suppose you are using an Agilent Technologies 1661CS logic analyzer and it
is NFS-mounted on your network. The name of analyzer 1 is 68000_BUS. You
have created some labels under analyzer 1, including one called "addr_lo."
The directory structure of the 1661CS logic analyzer looks like this:
68000_bus
addr_lo.txt
{label 2}.txt
{label3}.txt
1st_line.txt
line_num.txt
time_abs.txt
After setting up a measurement and acquiring data, you want to analyze the
data for label addr_lo on your PC. To copy the ASCII data to your local
computer, at the MS-DOS prompt enter:
copy L:\slot_a\data.asc\68000_BUS\addr_lo {local path name}
If your computer is running the UNIX operating system, you might use the cp
or dd command. In an MS Windows environment, you can use File Manager.
4-4
{Root}
slot_a slot_b
data.asc
data.asc
data.raw
data.raw
setup.raw
setup.raw
{analyzer 2}
system status
frame.txt
program
setup.raw mount.txt
system.txt
disk
graphics