If You Cannot Mount The Logic Analyzer File System; If You Cannot Access The File System Via Ftp - Agilent Technologies 1660C Series User Manual

Troubleshooting

If you cannot mount the logic analyzer file system

If you cannot mount the logic analyzer file system
If you get a "device busy" message:
Make sure that another user is not already accessing the file system as
the control user or connected to the command parser socket.
If you get a "stale NFS file handle" message:
Unmount the file system and try mounting again. The likely cause of this
error is turning off power to the logic analyzer before unmounting.
If you get a "server not responding" message:
If the power to the logic analyzer was just turned on, make sure that you
wait 15 seconds after the Analyzer Configuration menu is displayed
before attempting the mount.
Verify the LAN connection between your computer and the logic
analyzer. Refer to "If you cannot connect to the logic analyzer" earlier in
this section.

If you cannot access the file system via ftp

If you get a "connection refused" message:
If the power to the logic analyzer was just turned on, make sure that you
wait 15 seconds after the Analyzer Configuration menu is displayed
before attempting the connection.
If you get a "connection timed out" message:
Verify the LAN connection between your computer and the logic
analyzer. Refer to "If you cannot connect to the logic analyzer" earlier in
this section.
7–22