Agilent Technologies 1660C Series User Manual page 8

Connecting and Configuring
In order to use your logic analyzer's network capabilities, you need to
connect it to your network and configure the logic analyzer.
The following chart shows an overview of the process.
Connect the RJ-45 or BNC connector from
Connect
your network, then turn on the logic
analyzer.
Setup the configuration menus.
Configure
Verify connectivity with the ping utility.
Ping OK?
Ping
Mount the logic analyzer. Mount OK?
Mount
Ready to use.
1–2
Yes
Yes
Go to chapter 7,
No
"Troubleshooting."
No
Go to chapter 7,
"Troubleshooting."