Agilent Technologies 1660C Series User Manual page 22

Accessing the Logic Analyzer File System
To mount the file system via NFS
From Computers Running MS Windows
To use the logic analyzer in an MS Windows environment, you need to install a
program on your PC that allows you to use NFS protocol. One such program is
PC-NFS by SunSoft Inc.
To mount the logic analyzer's file system from a PC running MS Windows, use
the Network Connections menu in the Disk options of File Manager.
To connect to the logic analyzer from the File Manager in MS Windows,
Version 3.1, perform the following steps:
Open File Manager and select Disk. Then, select Network
1
Connections.
In the "New Connection" section of the pop-up menu, click on the
2
Drive Letter selection box and select the drive name you wish to use.
2-6