Agilent Technologies 1660C Series User Manual page 29

From the Computer
On your X server, enable analyzer-initiated windows.
1
Most X server packages have a security feature which stops unwanted
client-initiated windows from being displayed.
On computers running the UNIX operating system, you can enable
analyzer-initiated windows by entering the xhost command:
xhost +<analyzer IP address>
On computers that aren't running the UNIX operating system, the X server
package documentation will explain its security features.
Send the XWIN ON programming command to the logic analyzer.
2
The syntax of the XWIN ON command is:
xwin on,"<X server IP address>:<display>.<screen>"
The IP (Internet Protocol) address is the address of the X Windows server.
There are several methods for sending the XWIN ON command. The easiest
is using psuedo-telnet, but it can also be done using ftp or writing to the
NFS-mounted logic analyzer. See the following examples.
Example
NFS method using a UNIX computer
To enable windows to be initiated from the logic analyzer named lp1660C,
enter the following command on the computer running the X server:
xhost +lp1660C
If you have NFS mounted the analyzer's file system to a directory named
/logic on your computer whose IP address is 15.6.253.146 (and is running
the X server), enter the following command to start the X Window interface:
echo "xwin on,'15.6.253.146:0.0'" > /logic/system/program
Using the X Window Interface
To start the interface
3-5