Agilent Technologies 1660C Series User Manual page 2

Introducing the LAN Interface
The Logic Analyzer LAN interface lets you connect your logic analyzer to an
Ethernet network that uses TCP/IP. With the LAN Interface, you can:
•
Set up and run measurements using the logic analyzer's X Window
interface.
•
Copy measurement data from the logic analyzer to your computer using
File Transfer Protocol program (ftp) or Network File System (NFS).
•
Save and restore configurations.
•
Program the logic analyzer.
Requirements
In order to use your Agilent Technologies logic analyzer on the LAN, you
need the following equipment and software:
•
Agilent Technologies 1660C/CS-series logic analyzer with LAN option or
Agilent Technologies 1670A-series logic analyzer.
•
Ethernet local area network using TCP/IP protocol.
•
If you are using a PC, NFS program or ftp program.
•
If you want to use the logic analyzer's X Window interface, X server
program running on your computer.
Characteristics
Physical Connection
RJ-45 connector for direct connection to 10Base-T ("ethertwist")
networks
BNC connector for direct connection to 10Base2 ("thinlan") networks
Supported Protocols
Transmission Control Protocol/Internet Protocol (TCP/IP)
Network File System (NFS)
File Transfer Protocol (ftp)
X Window System Version 11, release 5 (X11R5)
Simple Network Management Protocol (SNMP)
ii