Agilent Technologies 1660C Series User Manual page 15

•
UNIX
For UNIX, use your network's command for an NFS mount.
For example:
mount [analyzer name:]/[control|data][mount point]
Some UNIX workstations will not accept a straight IP address. You must add
an aliased name for the logic analyzer to the host file, then use that name in
your mount command.
Refer to your network documentation for more information.
•
MS-DOS
For a PC using MS-DOS and running PC-NFS, use a form of the net use
command.
For example, PC-NFS uses:
net use [drive specifier][IP address or a named alias]\
[control|data]
Refer to your PC-based NFS documentation for more information.
•
MS Windows
For an MS Windows environment, refer to your Windows-based NFS
documentation and File Manager documentation for mounting instructions.
Connecting and Configuring
To mount the logic analyzer
1–9