Aastra 470 System Manual page 256

Operation and Maintenance
Event / error message
The licence limit for Dual
Homing has been reached
The licence limit for G.729
Codec has been reached
The licence limit for SIMPLE/
MSRP has been reached
The licence limit for standard
SIP terminals has been
reached
The licensing limit for the
maximum number of users
has been reached
The maximum number of
users is back below the licence
limit
TLS certificate update failed
TLS certificate update suc-
cessful
TLS certificate was generated:
Upgrade non-Aastra end-
points
256
Trigger condition
A SIP phone in the Aastra 6700i series has
attempted to register on a backup communica-
tion server and not enough licences are availa-
ble.
Note:
This event message is generated by the backup
communication server.
An attempt was made to set up a G.729 connec-
tion, but there are no free G.729 codecs availa-
ble at present.
A third-party application wishes to use the
MSRP and/or SIMPLE protocol for a user, but
not enough licences are available.
A standard SIP terminal is unable to register or
use the video functionality because there are
too few SIP Terminals or Video Terminals
available.
When the 37th user is created in AMS or
WebAdmin and no Aastra 470 Expansion
licence is in place.
An Aastra 470 Expansion licence is now availa-
ble or the number of users has been reduced to
36.
The update of the TLS certificate for an SIP node
or SIP endpoint via FTP has failed and needs to
be renewed manually.
If the endpoint type is = 0 (Aastra), then is
parameter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
A TLS certificate for a SIP node or SIP endpoint
was successfully renewed.
If the endpoint type is = 0 (Aastra), then is
parameter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
A TLS certificate has been generated. If genera-
tion is manual, the certificate must be imported
manually into the Aastra SIP nodes. The certifi-
cate must always be imported manually on all
non-Aastra nodes and non-Aastra endpoints.
Details
Date, time
Max. number of licences, date,
time
Date, time
Parameter 1=1: Missing
minals licence, parameter 2=1:
licences Missing Video Terminals
parameter 3=3: Max. number of
licences, date, time
Date, time
Date, time
Type of endpoint (0: Aastra,
1: 3rd party), node ID or certifi-
cate name, date, time
Type of endpoint (0: Aastra,
1: 3rd party), node ID or certifi-
cate name, date, time
Date, time
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
SIP Ter-
licence,