Change The Ip Media Module - Aastra 470 System Manual

Hide thumbs Also See for 470:
Table of Contents

Advertisement

6. 3. 4. 2

Change the IP media module

IP Media modules are fitted either to the call manager card or to PRI trunk cards.
To replace a defective IP media module to a call manager card, proceed as follows:
Warning
Be sure to observe the
1. Carry out preparations (see
2. Unscrew the screw on the Call Manager card and remove the card by pulling the
fastening screw.
3. Remove the defective module by loosening the 2 fastening screws and carefully
pulling the module out vertically of the module slot.
4. Place the new module in the slot and press it down evenly into the slot as far as
the stop.
5. Fit the module on to the call manager card from below using the 2 fastening
screws.
6. Carefully push back the call manager card into the shaft and gently press the
card as far as it goes into the connection on the backplane.
7. Secure the Call Manager card back into its slot with the screw.
8. Restart the call manager by pressing the On/Off button on the call manager
card.
Proceed accordingly to replace one defective IP media module to a PRI trunk card.
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
"Safety regulations", page
"Preparations", page
Operation and Maintenance
95.
221).
227

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents