System Capacity; General System Capacity - Aastra 470 System Manual

3. 4

System capacity

System capacities are defined on the one hand by the existing hardware with its ex-
pansion possibilities and on the other by the limits set in the software. The software
limits can be partly expandable by licences.
Note:
The values in the following three tables relate to a communication server
with an Aastra 470 Expansion expansion licence. Without this licence the
system is limited to the first 36 users in the numbering plan, which means
many values in the table are not valid.
3. 4. 1

General system capacity

The number of slots, interface cards and system modules per communication
server have already been mentioned in the previous chapters and are not listed
separately in this chapter.
Tab. 28 General system capacity
Max. number...
Nodes in a transparent network (AIN)
Nodes with SIP networking
User
3)
Terminals per user
Simultaneous connections
• Without IP and without DECT (internal / external)
• IP – not IP (internal / external)
• IP – IP (interne)
• IP – IP via SIP access channels (external)
• DECT – not DECT (internal / external)
• DECT – DECT (internal)
Voice channels VoIP (Standard Media Switch)
Voice channels VoIP (IP media switch)
Voice channels for call recording
Voice channels for voice mail
Voice channels for voice mail and call recording, total
Voice channels auto attendant
Voice channels for voice mail, Auto Attendant and call recording, total
Voice channels FoIP, T.38 (standard media switch)
Voice channels FoIP, T.38 (IP media switch)
CAS transmitter/receiver for PRI network interfaces
Trunk groups
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
Expansion Stages and System Capacity
4)
5)
6)
AIN with Aastra
Aastra 470
470 as Master
– 41
100 –
1)2)
400 600
16 16
184 250
184 250
250 250
240 240
50 250
50 250
24 / 24 per node
250 / 140 250 / 250
8 per node
16 per node
16 per node
46 per node
46 per node
3 per node
140 per node
150 per node
506 506
65