Event Types - Aastra 470 System Manual

Operation and Maintenance
6. 6. 1. 1

Event types

Tab. 103 Event types, in alphabetical order
Event / error message
AastraSIP terminals back
within the licence limit
Application card CPU2: Data
communication out of service
Application card CPU2: Data
communications back in ser-
vice
ATAS: connection established
ATAS: Connection lost
BluStar Client back within the
licence limit
Card in service
Card out of service
CL Printer Jam
CL-Printer available again
Compatible PMS application
Connection to PMS system
established
Connection to PMS system
failed
248
Trigger condition
Aastra SIP Terminals and Aastra Video Terminals
are now available.
Data communications with the CPU2 applica-
tions card have been interrupted for an unusu-
ally long period of time (1 hour) due to an error
(after a Windows update or due to other rea-
sons).
Data communications with the CPU2 applica-
tions card have been restored.
ATAS: connection (re) established
ATAS: connection lost
A sufficient number of licences is now available
again for BluStar clients.
Parameter 1: 0 (not used)
Licence type: 0 and 1: (not used), 2: BluStar CTI,
3: BluStar softphone, 4: BluStar video option,
5: BluStar presence option, 6: BluStar Microsoft
Lync Plugin, 7: BluStar IBM Sametime Plugin
A card that was previously out of service is back
in service again.
A card previously in operation has stopped
functioning.
• No response from system printer for past 4
minutes
• Printer out of paper or switched off
Printout on the system printer available once
again
The external hotel management system (PMS
application) is suitable for communicating with
the communication server.
A connection with a hotel management system
(PMS system) has now been successfully estab-
lished.
An unsuccessful attempt was made to establish
a connection with a hotel management system
(PMS system).
Reason: 1: Call rejected, 2: Destination unob-
tainable, 3: Destination busy, 4: Connection
timeout, 5: Wrong address, 6: Unknown error
Details
Parameter 1=1: Aastra SIP Ter-
minals licence, parameter 2=1:
Aastra Video Terminals licence,
data, time
Date, time
Date, time
Date, time
Cause (0: Logoff, 1: missing
cycle signal), date, time
Parameter 1, licence type, total
purchased licences, date, time
Number of the expansion slot,
date, time
Number of the expansion slot,
date, time
interface, interfaces/card num-
ber, port number, date, time
Date, time
Date, time
Date, time
Error, date, time
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013